Press Operator/ Finisher 3rd shift (10pm-6am Sun-Thur, 22.17 per hour + $1.50 Shift diff.)
Enpro Industries, Inc.

By joining us, you'll have the opportunity to make the most of your potential

We offer a highly competitive compensation and benefits package, including:

• Medical, dental, vision, Rx coverage for employee plus eligible dependents
• Life and AD & D insurance, dependent life insurance, long term disability, and HSA, FSA
• Employer matching 401K, PTO, holidays, EAP, wellness programs, on-site medical staff and fitness center

ESSENTIAL FUNCTIONS:

• Operates a series of steam and/or converted hydraulic presses in various molding operations consisting of long or short production runs of products made of various rubber compounds or a combination of rubber, fabric and/or metal blanks.
• Completes opening of press/mold by various manual means and closes partially by manual means and pushing control buttons.
• Performs duties that include:
  • Sets up assigned press line for maximum efficiency and productivity.
  • Raises and lowers presses.
  • Proper barring of press platens.
  • Applies mold wash to cavities.
  • Inserts blanks in mold cavities by hand.
  • Loads board, pots or plates.
  • Covers molds and inserts into press.
  • Cures stock for prescribed length of time.
  • Removes finished molded pieces from mold cavities, tear trim and deposits in provided containers.
• Uses care in loading molds to ensure that metal or rubber blanks are properly positioned. Inspection responsibilities will become paramount throughout molding cycle.
• Troubleshoots press as corrective action when defects occur with product.
• Audits pre-molded blanks for defects and proper weights during initial start-up.
• Informs Supervisor and/or Engineering of defective conditions concerning pre-molded blanks. Assists and suggests ways to correct defects.
• Inspects finished molded pieces, this inspection will involve the use of some form of gauge(s).
• Assures, then provides input to Supervision or Tech Aide as to the following:
  • Proper data codes are in place.
  • Durometer checks are O.K.
  • Status on stock availability and mold conditions.
• Provides input and data for histogram/bell chart development.
• Verifies mold wash correctness.
• Predetermines pressures, cure times and temperatures on product masters when presses are in operation. Employee will however, be alert to pressure changes, proper functioning of mechanical lubricating systems, temperature readings, bumps and pre-heat cycle so as to provide input and correct product masters if improprieties exist.
• Works with Supervision and Tech Aides to assure product master correctness, including trial runs, data gathering and verbal communication as to progress status.
• Miscellaneous functions such as tear trimming and stacking of parts will still be an essential duty of operators.
• Performs various finishing operations (manual or machine) on molded rubber items and other miscellaneous items in order to prepare them for shipment.
• Operates Nitrogen deflasher in the removal of flash from molded rubber products.
• Works closely with Engineering personnel in the development and establishment of standard operating data relative to new and/or experimental products.
• Prepares and maintains data cards for all molds.
• Sets controls for primary and secondary nitrogen blast cycles, media blast cycle, wheel speed controlling blast force of media, temperature control and overall cycle time.
• Dumps products into automatic loader and starts automatic cycle.
• Keeps check on AMP meter, speed indicator and cycle dials during run and upon completion of cycle, operates controls to remove product onto shaker unit and into tote pans.
• Moves all finished work to proper center and records production.
• Maintains equipment, cleans and lubricates machines, empties dust collectors and refuse containers, cleans screen trays and replenishes media as necessary.
• Miscellaneous functions such as tear trimming and stacking of parts will be an essential duty of the operator. May assist in Finishing operation as directed.
• Performs material handling as is necessary to complete work.
• Assures than non- conforming products do not enter the manufacturing sequence.
• Maintains all paperwork associated with the areas inventory, receipt and processing of product and related products.
• Prepares molder rubber products and related items for shipment by packing them in cartons and suitable container.
• Maintains customer order file and verifies the accuracy of all goods received for shipment
• Performs specific duties the include the checking of incoming products, transferring from tote pans to shipping containers, selection and forming of cartons, weigh counting products, visual inspection, sealing of cartons, and the marking of shipping and product data on carton.
• Color coding orders if required
• Marks all orders as to quantities shipped, makes out part shipment papers when necessary, and keeps a log of all orders shipped
• Performs all input necessary for the shipment of orders via computer

OTHER RESPONSIBILITIES:

• Maintains stock tote pans or containers in neat and orderly fashion.
• Adheres to all plant safety guidelines.
• Keeps work area in 5S condition.
• Performs other jobs as assigned by Supervisor.

The above statements are intended to describe general nature of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel classified under this job title.

EDUCATION:

• High School diploma or equivalent is required

COMPETENCIES:

JOB QUALIFICATIONS:

• Must have knowledge of quality control requirements related to the degreasing and spraying of product

PHYSICAL CONDITIONS:

• Able to lift 35lbs ( anything over 35 lbs. requires two people or a mechanical lifting device)

REPETITIVE MOTION TASKS:

• Arm/shoulder movement when loading / unloading molds and using spray gun. lifting & lowering mold covers, pushing and pulling molds, bending

DURATION OF SHIFT:

• 80%

OTHER:

WORKING CONDITIONS

• Heat, cold, dirt, dust, fumes, noise, bonding agents (chemicals) and seasonal variation with temperature
• Union environment.

• Enpro carefully considers a wide range of compensation factors including the background, education, training, and experience required, as well as geographic considerations such as cost of labor, and applicable local and state laws. These considerations can cause offered compensation to vary. The hiring range for this position is typically $22.17 - $23.48 hourly. Actual offer will be based on the individual candidate. Enpro offers a range of benefits including, but not limited to medical, dental, vision, life, 401(k) matching, and other supplemental insurance options.
  
  EnPro Industries are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
  
  This specification is intended to indicate the kinds of tasks and levels of work difficulty that will be required of positions that will be given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of any supervisor to assign, direct, and control the work of employees under his/her supervision. The use of a particular expression or illustration describing duties shall not be held to exclude other duties not mentioned. Ability to competently perform all the essential duties of the position, with or without reasonable accommodation, demonstrated commitment to effective customer service delivery, and the ability to work productively as a member of a team or work group are basic requirements of all positions at Garlock.
  
  #Garlock
  
  

---